Powering the Raspberry Pi.
Warning: Do this at your own risk. We will not be responcible for any or all issues. Chances of electrocution causing death can occur. Get a professional to help before you start this project if you are even the least bit unsure. Wanted to make a Raspberry Pi where I could have several units in one case. Putting several power supplies in one box seemed like a mess. Instead I decided to use an old "AT" (not atx) power supply. I did not want to cut up the cable from the power supply. I looked for a dead motherboard in the junk box. There was one! Now, had to get out the old heat fun (used for paint removal. Most "AT" motherboards are attached to the pc like this: But if you have a dead motherboard it will not need the Power supply header anymore. So the mother board looked like this: Now we want to add heat to the back side of the motherboard to release the header. Be careful as it is HOT. Solder could come flying and burn you. Wear protective clothing. Then once th...